Precautions And Maintenance Of The Side Slip Inspection Table

The side slip inspection platform is used to survey the coordination between the camber angle of the wheels and the toe in of the steering wheel during the driving process of a dynamic car. If the camber angle and toe in of the steering wheel are properly matched, the wheels will travel in a straight line. However, the currently used double plate linkage side slip platforms generally have synchronization deviation, that is, when one side of the slide plate moves, the other side of the slide plate will probably lag, This will probably affect the accuracy and precision of the survey. The reason for this is that the bearings used in the linkage mechanism have gaps at different stages. In addition, the rollers supporting the side sliding table skateboard are all located below the skateboard, making lubrication of the rollers very difficult.

The car side slip inspection platform is first used to dynamically measure the amount of front wheel side slip of a car and determine whether it has passed. Today, we will introduce to you the precautions about the side slip inspection platform? What is the maintenance of the sideslip inspection table?

Precautions when using the inspection bench:

Firstly, when driving over the side slide, the car must be perpendicular to the lateral centerline of the side slide.

Secondly, when the front wheels of the car pass through the skateboard, it is not possible to roll the steering wheel and apply the brakes.

Thirdly, the tire pressure must reach the specified value.

Fourthly, clean the soil, stones, and other debris on the tires in advance.

Maintenance method of inspection bench:

Firstly, after using the inspection table every day, it is necessary to clean and wipe the skateboard properly.

Secondly, after one month of application, remove the cover plate placed in the center, clean and lubricate the connecting parts with N46 mechanical oil, and tighten the connecting bolts according to requirements.

Thirdly, during application, the bolts and springs can be adjusted according to the required requirements to start adjusting the relaxation plate, ensuring that it moves flexibly, stably, and aligns with the outer edge of the skateboard after returning to its original position.

Fourthly, after another year of use, the skateboard should be removed, the rollers and roller seats should be cleaned, and N46 mechanical oil should be added to the rollers.