Knowledge

Market demand analysis of high-speed ABS brake test bench

In the modern automotive industry, safety has always been a focus of concern for both consumers and manufacturers. With the continuous increase of vehicle speed, the performance of

The ABS brake pad detection data is inaccurate. Is it a sensor fault or an er...

The inaccurate detection data of ABS brake bench, sensor faults, and incorrect system parameter settings may be the key reasons. In addition, there are other factors that can also

Common measurement errors and solutions of 3D laser four-wheel alignment inst...

Improving the detection speed and accuracy of the 3D laser four-wheel alignment device requires comprehensive improvements in equipment optimization, operating procedures, environm

Product Introduction

Product Introduction

The Structural Composition of Automotive Chassis Dynamometer

Load platform: One of the main components of a chassis dynamometer is the load platform. Load bearing platforms are usually made of sturdy metal and can withstand the weight of car

Chassis dynamometer can detect what items

Chassis dynamometer is a kind of inspection equipment widely used in the automotive industry, which is able to carry out comprehensive evaluation and testing of the chassis of the

Chassis dynamometer frequency converter reset method

Before the reset of the inverter, it is first necessary to clarify whether it really needs to be reset. The problem of inverter may be manifested as the motor cannot start normally

Reasons for exceeding the limit of automobile exhaust emissions detected by e...

With the mandatory emission reduction by the country and the gradual implementation of policies to promote environmental protection, various regions have gradually strengthened the

Operation steps and precautions of the brake detection platform

Open the main computer, double-click on the device management program on the desktop, and check the communication status of the device.

What are the preparations for checking the four-wheel alignment device

After driving for a while, the car may experience displacement, and there may also be abnormal damage to the tires, such as unilateral damage, uneven or feather shaped damage, heav

Problems that can be caused by abnormal viewing angle of the four-wheel align...

After the annual vehicle inspection or safety accident, in most cases, it is necessary to use a large vehicle four-wheel alignment device to inspect the vehicle body

Chassis dynamometer synchronization belt how to check

First, it is crucial to know when and how often you need to check the sync belt. In general, it is recommended to inspect the synchronization belt every three months, or after the