Four Key Points For Maintaining A Four-wheel Alignment Device

1, Manufacturer of four-wheel positioning for electric vehicles for safe use of equipment

Due to the high power of the vehicle repair workshop, there are many precautions to ensure the regular operation of the vehicle for the general public. Suggest that customers who pay attention to the application of 3D locators should choose small and medium-sized voltage stabilizers as much as possible to establish working voltage reliability, reduce and ensure attention to electronic component consumption; If there is a problem of frequent power outages in the computer, in order to fully consider the safety factor of data, it is suggested to configure the computer with an uninterruptible power switch as much as possible.

2, Pay attention to the anti fouling and waterproof solutions of key components

Because the three-dimensional four-wheel alignment of a large vehicle is composed of precise components, waterproofing is particularly crucial. With the increase of periodic precipitation, especially in southern regions, please prepare in advance for waterproofing and waterproofing; Also, pay attention to avoiding car wash stations as much as possible.

3, Common maintenance issues for 3D overall target disk and hanger

After the application is completed, the overall target disk should be immediately hung back to the main box, and at the same time, a soft dry fabric should be used to scrub to prevent surface scratches. Prevent sunlight exposure and place in a cool and shaded place. If the top edge of the hanger is severely damaged, it must be replaced to prevent scratching the wheels; Apply lubricating grease to the suspension ball screw and slide rail on time to ensure their coordination ability. Hangers should be handled with care, and when not in use, they should be placed on the fixed bracket for proper maintenance to prevent damage and harm to measurement accuracy, as well as to pay attention to their service life.

4, Pay attention to the overall regulations of the conditions

Pay attention to the ambient temperature and relative humidity of the environment for four-wheel alignment of large vehicles: The ideal ambient temperature on the computer is 5 ℃ -35 ℃. If the relative humidity of the air is too low or too high, it can easily lead to regular operation and repeated jamming. In an ideal job, the relative humidity of the air is 30% -80%. High relative humidity in the air can easily lead to short circuit faults, while low humidity can easily cause electrostatic induction, and it is important to maintain natural ventilation during operation.