The application status and maintenance of dynamic four-wheel alignment instrument

The data statistics explicitly stated in the car manual are the same as those indicated on the electronic computer of the dynamic four-wheel alignment instrument, indicating that they are practical. Normally, the dynamic four-wheel alignment instrument must be carried out under the following conditions.

1. After dismantling a new tire or causing a collision safety accident due to maintenance;

2. One side of the front, rear, and left and right tires is partially damaged;

3. The steering wheel is too heavy or shakes when driving safely;

4. When driving straight, the car leans to the left or right;

5. Although there is no left or right deviation, due to the purpose of maintenance and upkeep, it is proposed to test the safety of the new car after driving for 3 months, and after 6 months or more than 10000 kilometers.

Dynamic four-wheel alignment instrument is a type of precision electronic measuring instrument that requires careful maintenance and upkeep during use; In addition, in order to better present customers with a fast, accurate, and powerful four-wheel alignment service project, the management personnel of the operation process need to understand the use of various four-wheel alignment equipment in order to ensure reasonable use.

1, Daily maintenance and upkeep

The key to maintaining the dynamic four-wheel alignment instrument in daily life is to ensure that the precise measurement part of the control board should be resistant to dirt, sun protection, isolation, protection, and moisture. During use, it is necessary to ensure that the experimental instruments are handled with care and handled with care, and not damaged to prevent damage to the instruments.

2, Smooth use of switching power supply

The rated voltage of the APL four-wheel positioning switch power supply is 220V. If the external switching power supply is unstable, an efficiency stabilizer should be used.

3, Moderately charge the sensor

After each dynamic four-wheel alignment test, the sensor must be stably hung on the network cabinet to ensure stable contact between the charging base and the sensor charging. If the four-wheel locator is not frequently used, the sensor needs to be charged every few days (usually 2 to 3 days). Frequent charging can ensure the normal lifespan of the sensor's rechargeable battery.