Vehicle Speed Table

Speedometer is mainly used to detect the indicating error of motor vehicle speedometer ‌. By driving the tested vehicle onto the test platform, the performance and error value of the speedometer can be detected at the speed of 0~120Km/h, so as to judge whether the error of the speed indication value of the tested vehicle is qualified ‌ Working principle and function The vehicle off-line speed table provides clear and accurate measurement results through dual display of pointer + digital. It can measure the speedometer error of the car at different speeds to ensure the safety performance of the vehicle ‌. Clear and read and judge fault code status and shield fault code according to the condition of fault code;

Send Inquiry

Description

The vehicle offline integrated diagnostic equipment supports the initialization and detection functions of each node module, with the following characteristics:

complete functions:

Configuration information, VIN code, MTOC code, offline time, fault code configuration information, etc.;

With I / O control of node module executor and reading and judgment function of ECU output information;

Clear and read and judge fault code status and shield fault code according to the condition of fault code;

Read and proofread the part number and hardware and software version number of the node module;

Read and judge the function of the sensor and the switch status of the node module;

Online refresh function of the node module software;

Block the fault code function by condition.

Support the separate repair function of the node module;

Support the exit factory mode function of the node module;

Support network upload management of data detection and data communication management between servers and other network systems (such as MES system);

Advanced technology:

Support ODX import, manual editing or reference dedicated third-party editing software, applications.

Support the Ethernet diagnostic communication, and meet the requirements of the DOIP protocol;

Strong expansion:

Based on the need of rapid response to the changes of the production line, the data platform and editing platform of the electrical inspection equipment are open to the factory side, and the management personnel of the oEMS and the research institute can modify the procedures in time according to the actual production line situation.