What issues should be noted when using a four-wheel alignment device

In the daily life of car repair manufacturers, large car four-wheel aligners are used, but we need to be aware that four-wheel aligners are a type of instrument, so they need to be very careful during use.

1, Safe use of electricity for machinery and equipment. Due to the high output power of the machinery and equipment in the car assembly workshop, it is possible to maintain the regular operation of customers more quickly. Recommend customers who use four-wheel positioning machine equipment to configure small and medium-sized voltage regulators to achieve stable resistance values, reduce and ensure the consumption of electronic components in the machine equipment.

2, Machine equipment mainly solves the problem of anti fouling and waterproofing of components. Waterproof and waterproof machine equipment is particularly crucial, as the four-wheel positioning machine equipment is composed of fine components. With the increase of periodic precipitation, especially in the southwest region, please prepare for waterproofing and moisture prevention. In addition, machinery and equipment must be kept away from car washing areas, as dust is ultimately the culprit behind fine components.

3, Common precautions for maintenance and upkeep of the four-wheel overall target plate and support frame. After use, hang the overall target disk back into the chassis and wipe it with a dry and soft cloth to prevent surface scratches. Prevent sunlight exposure and place in a cool and shaded place. If the top of the support frame is severely damaged, it must be replaced to avoid scratching the edges. Apply lubricating grease to the screws and sliding rods of the support frame on time to ensure their coordination ability. Hangers should be carefully transported. When not in use, appropriate maintenance should be carried out on the support frame to prevent damage, interference with measurement accuracy, and the service life of the machine equipment.

4, Product regulations for machine equipment conditions. Pay attention to the ambient temperature and humidity of the four-wheel alignment instrument for large vehicles: The ideal ambient temperature for electronic computers is 5 ℃ -35 ℃. If the ambient humidity is too low or too high, it is very easy to cause regular operation and frequent jamming. The ideal operating environment humidity is 30-80%. Excessive environmental humidity is likely to cause short circuit faults. If the humidity in the environment is too low, it is very likely that static electricity will occur. Ensure natural ventilation and heat dissipation.